UPVC Plastic Cartridge Filter Housing 20" For Water Treatment , 0.6Mpa

UPVC Plastic Cartridge Filter Housing 20" For Water Treatment , 0.6Mpa

Quick Detail:

Plastic cartridge filter housings are corrosion resistant, can be used in SS-none-replace field. 

Description:

- All the parts of this series filters are made of UPVC material for best chemical compatibility and corrosion resistance.

- All filter housings hydrostatically tested

- The inlet and outlet are in the same line, which connected with the pipe is adopt a 1.5” or a 2” union.

- The water is distributed from bottom to top.Water is well-proportioned with small

strike to cartridges and air is easy to be discharged.

- The bottom system is designed together as a whole with the top localizer & closure system.

Cartridges are easy to be installed, push down and closed, preventing leaking inside.

- A series: The lid and the body are connected by a nut. Ensure a good seal performance.

- B series: The lid and the body are connected using eyebolts flange method, ensure the filter can stand higher pressure.

- UPVC cartridge filter housing is corrosion resistant, It can be used in SS-none-replace field.

- It is achieved 0-0.6Mpa 100,000 times recycle fatigue test successfully.

Applications:

• Commercial/Residential Drinking Water
• Cooling Tower Filtration
• Process Water
• Reverse Osmosis Pre-Filtration
• Ground Water Remediation
• Utility Water
• Industrial Waste Water Treatment
• Ground Water Under Direct I
  UPVC Plastic Cartridge Filter Housing 20" For Water Treatment , 0.6Mpa